Filter By:
- Body Care (2)
- Car Racks (41)
- Children's-Bike Accessories (5)
- Electronics (26)
- Eyewear (40)
- Fenders (23)
- Hydration (40)
- Lighting (15)
- Show More Categories
- Locks/Security (13)
- Nutrition (17)
- Packs/Racks/Baskets (68)
- Pumps/Inflation (27)
- Safety (30)
- Storage (7)
- Tools/Maintenance (103)
- Trailers/Strollers (7)
- Indoor Cycling (8)
- Other (10)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Accessories
$65.00
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount.
- 15mm x 110mm
- Axle is not included. Works with your bike's thru-axle
- Built in safety tabs
- Durable black powder-coat finish
- All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts
Product Specs:
- Weight: 0.40 lbs.
- Dimensions: L 4.50 in x W 1.25 in x H 4.00 in
- Limited Lifetime Warranty
$39.00
Give your truck bed a permanent bike-mounting solution with this fork-style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative.
- A "bolt anywhere" fork-style bike mount
- Fits bikes with 9mm x 100mm front hubs
- Corrosion-resistant anodized aluminum construction
Product Specs:
- Weight: 0.50 lbs.
- Dimensions: L 4.00 in x W 1.50 in x H 1.87 in
- Limited Lifetime Warranty
$12.50
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
$12.00
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks.
- Includes two straps
- Weight: 0.44 lbs.
- Dimensions: L 15.50 in x W 1.00 in x H 18 in
$65.00
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack.
- Axle not included. Works with your bike's thru-axle
- Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc.
- Built-in safety tabs
- Durable black powder-coat finish
Product Specs:
- Weight: 0.32 – 0.38 lbs.
- Minimum Crossbar Spread 16in
- Maximum Crossbar Spread 42in
- Limited Lifetime Warranty
$179.00
The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
$199.00
Friends will double-take when they see our most versatile, aerodynamic bike mount on your car. It carries your complete bike—no wheel removal needed. The universal mounting system fits nearly any crossbars you can think of.
- Fits Yakima round, square, factory or aerodynamic crossbars
- Zero contact with frame; carbon fiber and custom paint jobs are protected
- Accommodates disc brakes, thru axles, and full suspension bikes
- Holds bike upright while you secure the bike to the mount
- Leave your front wheel on for easy loading (some fenders may need to be removed to transport bike)
- No tools or assembly required
- Fits 20" to 27.5" wheels with tire widths up to 3" and 29" wheels with tires widths up to 2.7"
- SKS Locks sold separately
- 1 bike, up to 40 lbs at min of 18" crossbar spread; or up to 30 lbs at min of 16" crossbar spread
- Accommodates bike wheelbases up to 48"
Product Specs:
- Weight: 13.00 lbs.
- Dimensions: L 56.00 in x W 7.00 in x H 7.50 in
- Minimum Crossbar Spread 16.00in
- Maximum Crossbar Spread 42.00in
- Limited Lifetime Warranty
$259.00
A fresher take on the classic strap rack, the Yakima FullBack 2 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 2 TECHNICAL SPECS - Weight: 22.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
$279.00
A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
$219.00 - $229.00
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck's tailgate while the soft felt backing protects your truck's paint. Integrated SitTight bike cradles and G-hook buckles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top.
- G-Hook tension lock system is easy on carbon bike frames and painted surfaces
- Medium: Transports up to 5 bikes; Large: Transports up to 6 bikes
- Rugged, vinyl coated nylon outer material resists abrasion and weather damage
- Extra soft felt backing protects your trucks paint job
- Add your own bike lock to the built-in cable lock loop to secure GateKeeper and your bikes to your truck
- Reinforced webbing ends for easy installation under the tailgate
- Integrated strap management system keeps the pad tight and secure on the way to the trailhead
- HindSight tuck-away cover opens up the view for your back-up camera
- Medium: Fits mid-size and some older full-size trucks with tailgates from 53-61" wide; Large: Fits modern, full-size trucks with tailgates 62" or wider
- Printed graphics and silver reflective Yakima logo
PRODUCT SPECS
- Size Medium: Weight: 6.43 lbs; Dimensions: L 53.00 in x W 5.00 in x H 17.00 in
- Size Large: Weight: 8.15 lbs; Dimensions: L 62.00 in x W 7.00 in x H 20.00 in
$49.00
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
$169.00
Super simple and built to last, the new Yakima HangOut 2 offers grab-and-go bike carrying convenience for almost any vehicle. The adjustable strap system and QuickTrigger hub make installation easy, and the padded feet and coated metal buckles protect your vehicle’s paint. Integrated StableCradles secure your bikes for a confident carry and make loading and unloading a piece of cake. When you aren’t off adventuring, the HangOut folds flat for compact storage.
- QuickTrigger hub system makes install easy and fast
- Integrated StableCradles hold bikes firmly in place
- Padded feet and coated metal buckles protect your vehicle
- Arms fold for compact storage
- Number of Bikes: 2
TECHNICAL SPECS
- Weight: 16.00 lbs
- Dimensions: L 27.50” x W 21.50” x H 11.25”
$179.00
Super simple and built to last, the new HangOut 3offers grab-and-go bike carrying convenience for almost any vehicle. The adjustable strap system and QuickTrigger hub make installation easy, and the padded feet and coated metal buckles protect your vehicle’s paint. Integrated StableCradles secure your bikes for a confident carry and make loading and unloading a piece of cake. When you aren’t off adventuring, the HangOut folds flat for compact storage. - QuickTrigger hub system makes install easy and fast - Integrated StableCradles hold bikes firmly in place - Padded feet and coated metal buckles protect your vehicle - Available in two or three bike carrying capacities - Arms fold for compact storage - Number of Bikes: 3 TECHNICAL SPECS - Weight: 16.00 lbs - Dimensions: L 27.50” x W 21.50” x H 11.25”
$649.00
Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to four mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session!
Product Details:
- Transports up to 4 bikes using minimal space 37.5 lbs max per bike
- Foot-operated tilt mechanism changes rack position for easy loading and unloading
- Tilts down and out of the way for easy rear-of-vehicle access
- Securely supports bikes by the fork crown
- Fits suspension-fork bikes only
- Fits fat bike suspension forks
- Soft padding protects the fork’s finish
- Rotating wheel cup accommodates bikes with various wheelbases
- 2 mast height positions for improved ground clearance and ease of loading
- 2 mast angles to avoid bike-tire contact with your vehicle
- HitchLock included
- Built-in bottle opener, cheers!
- Fits 2" hitch receivers only
- Compatible with the sold separately BackSwing
- Add your own bike lock to the integrated lock loop for greater bike security
Product Specs:
- Weight: 65.00 lbs
- Dimensions: L 22.00in x W 46.00in x H 60.00in
- Some assembly required, 10 minute install
- 2" hitch receiver required
$899.00
All your bikes, all at once. The HangTight is designed for versatility, built to handle adventures of all sorts, and won’t blink at anything from kids to fat bikes to road to mountain bikes and everything in between. With fully padded cradles that support each bike by the handlebars, it serves up a shuttle-ready blend of stability and ease of use. The HangTight will get your bikes to the ride and back home safely no matter if your crew is a mix of all-mountain shredders or simply a family headed out for two-wheeled exploration.
PRODUCT DETAILS
- Transports up to 4 flat bar Bikes or 3 drop bar bikes using minimal space
- Securely supports most road, mountain, kids, and cruiser bikes by the handlebar
- Fully padded cradles protect your handlebars, including carbon bars
- Rotating rear wheel cup fits a wide range of wheelbases up to 50"
- Accommodates bikes up to 37.5 lbs. each
- Holds 20"-29" tires up to 5" wide
- Add your own bike lock to the integrated lock loop for greater bike security
- Foot-operated tilt mechanism makes it easy to access the rear of the vehicle.
- Dual cradle retention stabilizes and protects bikes from one another.
- HitchLock included
- Built-in bottle opener—cheers!
- Fits 2" hitch receivers only
- Compatible with the Yakima BackSwing and StraightShot (HangTight 4 only)
- Not compatible with aero handlebars, clip-on aero bars, or handlebars larger than 35mm in diameter
- Transport dual-crown fork bikes with the HangTight DH Cradle accessories (sold Seperatly)
PRODUCT SPECS
- Weight: 73.00 lbs.
$34.00
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
$399.00
This handy add-on doubles your HoldUp bike hitch carrier's capacity from 2 to 4 bikes—perfect for quadruplets on a family outing. Holds up to two bikes.
- Expands your bike-hauling capacity from 2 to 4 bikes
- StrongArm design secures bike at wheels, protecting paint and carbon frames
- Fits 20" – 27.5" wheel sizes with tires up to 3.0" wide and 29" tires up to 2.5" wide
- Accommodates bike wheelbases up to 48"
- Accommodates disc brakes, through axles, and full suspension bikes
- Tilts down with bikes loaded for rear-of-vehicle access
- Side-to-side adjustability to adjust space between bikes
- Carries 2 bikes (2" receiver only)
- 4 bikes, 200 lbs total, with the HoldUp
Product Specs:
- Weight: 49.00 lbs.
- Dimensions: L 56.50 in x W 64.00 in x H 12.00 in
- Limited Lifetime Warranty
$69.00
If you've got a truck bed or pretty much anywhere you can insert a couple bolts, you've got yourself a place to install this handy fork-style bike mount. This one comes with a locking single-sided adjustment skewer so you can secure your bike easily. Includes SKS lock core and two SKS keys.
- A "bolt anywhere" fork-style bike mount
- Fits bikes with 9mm x 100mm front hubs
- Locking single-sided adjustment skewer with long throw for easy bike loading. SKS Lock Core included
- Corrosion-resistant anodized aluminum construction
Product Specs:
- Weight: 1.45 lbs.
- Limited Lifetime Warranty
$349.00
The LongHaul is a bike rack designed, built, and thoroughly tested to stand up to the long miles and rigorous demands of RV and travel-trailer use. Durable, stable and secure, the LongHaul carries four bikes with ease in the SuperCush ZipStrip cradles. The LongHaul is easy on and off, includes folding arms and a built-in bottle opener. Exceptional security is built in with a full SKS security package that locks your bikes to the rack and the rack to the vehicle. Holds up to four bikes.
- RV Tested and Approved.
- SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze.
- Anti-sway cradle design holds bikes in place and minimizes bike-to-bike contact.
- Included full SKS security package: HitchLock locks rack to RV and LockDown cable secures bikes to rack, all with a single key.
- Arms fold down when rack is not in use for easy parking and storage.
- 37.5lb weight maximum per bike.
- Carries up to 4 bikes.
- Available: TubeTop;(sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes.
Product Specs:
- Weight: 32.00 lbs.
- Dimensions: L 28.00 in x W 13.00 in x H 41.00 in
- Limited Lifetime Warranty
$699.00
Say goodbye to awkward loading options, and hello to your e-bike’s new best friend. The OnRamp blends simple, efficient design with secure performance, to create a no-compromise rack to ease the challenge of carrying heavier bikes. An integrated ramp lets you roll your ride right into place, adjustable trays reduce bike-to-bike interference, and conforming frame clamps means it can carry a wide range of bike styles—from e-bikes to town bikes to mountain bikes and fendered-up road bikes—with ease. With a capacity of up to two 66-pound bikes, you can leave your battery on the bike and hit the road.
Product Details
- Engineered to carry 2 bikes up to 66-lbs each
- Integrated ramp for easy, roll-on loading, and stows away neatly
- Adjustable frame attachments mean you can carry E-Bikes, mountain, road, hybrid, women’s specific, BMX, kids bikes, and bikes with fenders with ease.
- Accommodates tires up to 3.25” wide and up to 27.5 x 4.5” wide tires with the FatStrap Kit (sold separately)
- Accommodates bike wheelbases up to 50”
- Integrated SKS (Same Key System) locks included to secure bikes to rack and rack to vehicle receiver
- Tilts forward with bikes loaded for trunk access
- Adjustable bike trays minimize bike-to bike-interference
- Off-Road Rated at 40lbs per bike
- RV Rated at 40lbs per bike
Product Specs
- Weight: 40.80 lbs.
- Dimensions: L 34.00 in x W 52.00 in x H 45.00 in
- Limited Lifetime Warranty
$20.00
Fat bikes fit fine with long wheel straps to carry fat bikes on OnRamp.
- Includes 2 FatStraps to carry one fat bike
- Fits tires sizes up to 26x 4.5", 27.5" x 4.5" and 29x 3.25"
$50.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way.
- Fits all lockable accessories
- Includes 2 SKS Cores and matching keys
- 2 keys included plus a control key
$749.00
Load up and Go! From road trips with pets to camping with your friends who bring way too much stuff. Make more room inside your vehicle with the SkyBox NX. This do it all cargo box is packed with features like worry-free mounting hardware that fits most crossbars, a flat bottom interior so you can take full advantage of more usable space, and the dependability and security of full metal locking handles.
PRODUCT DETAILS
- 16 cubic feet of cargo space
- NX nano-texture on both lid and base for a clean sleek look
- Full metal opening handle is easy to use and locks gear inside the box and the box to the vehicle
- Removable torque limiting knob ensures a safe and secure installation
- Market-leading internal usable space with an unobstructed flattened floor provides more space for your gear
- Optimized hatch clearance for better vehicle fit
- Dual-sided opening for easy access on either side of your vehicle
- SKS Locks included for added security
- Integrated interior tie-down points
- Hauls gear for up to 3 campers; fits snowboards and skis up to 175cm
- Made in the USA
PRODUCT SPECS
- Minimum Crossbar Spread 24.00in
- Maximum Crossbar Spread 36.00in
$799.00
Load up and Go! From road trips with pets to camping with your friends who bring way too much stuff. Make more room inside your vehicle with the SkyBox NX. This do it all cargo box is packed with features like worry-free mounting hardware that fits most crossbars, a flat bottom interior so you can take full advantage of more usable space, and the dependability and security of full metal locking handles.
PRODUCT DETAILS
- 18 cubic feet of cargo space
- NX nano-texture on both lid and base for a clean sleek look
- Full metal opening handle is easy to use and locks gear inside the box and the box to the vehicle
- Removable torque limiting knob ensures a safe and secure installation
- Market-leading internal usable space with an unobstructed flattened floor provides more space for your gear
- Optimized hatch clearance for better vehicle fit
- Dual-sided opening for easy access on either side of your vehicle
- SKS Locks included for added security
- Integrated interior tie-down points
- Hauls gear for up to 4 campers; fits snowboards and skis up to 195cm
- Made in the USA
PRODUCT SPECS
- Minimum Crossbar Spread 24.00in
- Maximum Crossbar Spread 40.00in
$29.00
Fat bikes fit fine with long wheel straps to accommodate fat bikes on StageTwo and StageTwo +2.
- Includes 2 FatStraps to carry two fat bikes?
- Fits tires sizes up to 20x 4.0", 26" x 5.0" and 27.5x 4.5"
$49.00
Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts.
This Item may be in stock with Black accents or with Red, but both use the same part numbers.
Please contact us to confirm the color of product in stock.
$59.00
Have an older Yakima mount but have aero or factory crossbars? No problem. This is the simple and economical way to adapt classic Yakima mounts to just about any size and shape crossbar. The Dynaflex padding to provide all the extra protection and grip you need. Come in sets of four.
- Simple, economical way to attach classic RoundBar only Yakima mounts to your factory or aerodynamic roof rack system
- Dynaflex padding provide protection and grip
- Not compatible with classic Yakima fork-mounted bike carriers;
- Sold in sets of 4
Product Specs:
- Weight: 3.25 lbs.
- Limited Lifetime Warrantyhttps://cdn.shopify.com/s/files/1/0266/3943/3776/products/1_5024962c-0820-4ae8-8909-d5ad194b535e_1024x1024.jpg
$47.95 - $67.95
- A slim, strong multi-tool with 11 functions for common bike repairs and everyday needs
- Six hex bits are stored inside the handles that fit into the end of a ball detent swivel head for use. It is small enough to fit into a riding tool wrap or pocket, and has an optional key ring attachment to fit on any keychain for use away from the bike
- All bits are ED-coated and corrosion-resistant
- Magnets keep all bits in place and secure
- Ball detent swivel head tested to over 40Nm of torque
- Same bits as 8-Bit System and EnCase System multi-tools
- Includes: Six bits with eleven functions: 2, 2.5, 3, 4, 5, 6, and 8mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible bits
$24.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back.
- Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames)
- 6061-T6 aluminum brackets, stainless hardware
- Weight (no hardware) – 20g
- Maximum load 1700g
- Designed to carry two bottles or accessories off of one B-RAD base
$119.95
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter.
- 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx)
- Magnets & O-rings keep all parts in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar when ball detent swivel head is bent for extra torque
- Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included)
- Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators)
- Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
- Chain & Tire Plug tool compatible with all bicycle chains including 12-speed
- Inserter tool and bacon strips plug holes in tubeless tires
- Five strips included; refills available
- Hardened steel pin for lifetime durability
- Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench
- Storage sleeves made of vibration-damping material and snug fit prevents rattling
- Durable precision-machined aluminum end caps
- Custom fit rubber flap can be trimmed to fit in smaller diameter bars
- Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately)
- Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
Page 1 of 16
Next page