Storage

• Vinyl-coated • 2-pc set • Wood Thread

The Steadyrack Fat Bike Rack is one of the only bike racks on the market that caters specifically to bikes with tires greater than 3 inches. The Steadyrack Fat Rack can be mounted to virtually any wall and will swivel almost 160 degrees from side to side. It minimizes space without compromising safety and there is no heavy lifting required. This is a truly revolutionary way to store a lot of bikes without taking up much space. Designed for tires 2. 2" to 5", bikes without fenders & with a maximum weight of 77 lbs. E-bike compatible. Not for use with fenders. Technical Specifications: - Dimensions: 12cm x 12cm x 85.5cm - Weight: 4.3kg - Material: Zinc plated steel and plastic - Maximum Tire Width: 2.8" to 5" - Recommended Wheel Diameter (inc tire): 20'' – 29'' - Bike Style: Fat Bikes, eBikes with 'Fat' Tires - Bikes With Fenders: No - Maximum Recommended Weight: 35kg Installation We recommend that you measure each of your bikes and mount the racks accordingly, using our installation instructions below or by watching our installation video. This will ensure they're easy to use for all bike owners. Disclaimer: We do not recommend installing our bike racks into dry wall/gyprock. If this is done, our warranty will be void. Please read our installation guide above carefully to ensure you understand where Steadyracks should be installed, and tips on how to safely install on drywall/gyprock whilst upholding warranty.

The Steadyrack Fender Bike Rack is one of the only bike racks designed specifically to accommodate bikes with fenders and mudguards. The Steadyrack Fender Rack can be mounted to virtually any wall and its patented design allows it to swivel almost 160 degrees to either side. It minimizes space without compromising safety and there is no heavy lifting required. This is a truly revolutionary way to store a lot of bikes without taking up much space. Ideal for tires up to 2. 4", bikes with fenders & with a maximum weight of 55 lbs. Some bikes with fenders may not be suitable for this rack. The Steadyrack Fender rack works by sliding between the fender/mudguard and tire when rolling the bike onto the rack. If the stays (steel arms connecting the fender to the bike frame) are very close to the tire or rigid with no flexibility there may not be room to fit the rack arms between and you will not be able to mount the bike in the rack. We recommend a minimum 2cm / 3/4 inch clearance between the tire and stays to enable the rack to flex and fit between. Technical Specifications: - Dimensions: 12cm x 12cm x 72cm - Weight: 3.1kg - Material: Zinc plated steel and plastic - Maximum Tire Width: Up to 2.4" - Recommended Wheel Diameter (inc tire): 20" - 29" - Bike Style: eBikes - WITH Fenders, Road, Time Trial, Hybrid, Small MTB, Commuter, City, Town - Bikes With Fenders: Yes - Maximum Recommended Weight: 25kg Installation: We recommend that you measure each of your bikes and mount the racks accordingly, using our installation instructions below or by watching our installation video. This will ensure they're easy to use for all bike owners. Disclaimer: We do not recommend installing our bike racks into dry wall/gyprock. If this is done, our warranty will be void. Please read our installation guide above carefully to ensure you understand where Steadyracks should be installed, and tips on how to safely install on drywall/gyprock whilst upholding warranty.

Our Mountain Bike (MTB) Rack is designed with larger and stronger folding arms to handle both regular MTB tire sizes as well as plus-size tires. In fact, our MTB bike rack is also suitable for any bike with larger tire sizes and including eBikes and heavy bikes up to 35kg. If you have different brands and models of bike there’s no need to worry about the frame geometry or size. As long as they have round front wheels they will fit in our racks! Like all of our Steadyrack bike wall mounts, you can swivel or pivot your bike side to side up to 160 degrees to get your bike as close to the wall as possible. The vertical mountain bike rack will also fold away when not in use for maximum storage and space efficiency. Our MTB Bike Racks can be mounted on any structurally sound wall or vertical surface, giving you peace of mind whether you’re hanging your MTB in a hallway, in a garage or on a balcony. Not suitable for bikes with permanent or fixed front fenders. Some clip-on front Fenders are OK. These are common with MTB and Fat Bikes, but you can also get them for road bikes, commuter bikes, and hybrids. Check if your bike is suitable for this rack by viewing the measurement instructions. Technical Specifications: - Dimensions: 12cm x 12cm x 80.8cm - Weight: 3.7kg - Material Zinc plated steel and plastic - Maximum Tire Width: 2.1" - 2.8" - Recommended Wheel Diameter (inc tire): 20" - 29" - Bike Style eBikes, MTB, eMTB, Gravel - Bikes With Fenders: No Installation: We recommend that you measure each of your bikes and mount the racks accordingly, using our installation instructions below or by watching our installation video. This will ensure they're easy to use for all bike owners. Disclaimer: We do not recommend installing our bike racks into dry wall/gyprock. If this is done, our warranty will be void. Please read our installation guide above carefully to ensure you understand where Steadyracks should be installed, and tips on how to safely install on drywall/gyprock whilst upholding warranty.

The Saris Mighty Mite is a lightweight, solid bike-parking rack for indoor, outdoor, and residential use. Built with a rugged, weatherproof steel frame, the Mighty Mite holds up to six bikes within its compact footprint.

Features - Universal bicycle cover - Bag is attached to the cover for easy use - Made from nylon - Fits most bicycles - Water resistant

- Easily holds a bike, kayak, or ladder - Efficient pulley system helps you lift and lower heavier objects - Auto-locking mechanism prevents accidental release - Engineered for durability with tough silver powder coat finish - Includes mounting hardware and full instructions - Maximum load: 50lbs

Stud mounted bike hooks that provide additional padding around the rim contact area to provide added durability. - Sold as a pair - Custom molded hook covering - Screws into any wood stud

A shop grade floor stand that adjusts to any wheel size. - Extremely adjustable to securely hold any wheel size - Wide base with triangulated arms hold bikes firmly - Easy in-out for practical store use - Dimensions: 22 x 15 x 17" (560 x 380 x 430mm) - Tool-free adjustment with thumb screws - Rubberized feet protect floors